1) Make sure buret is clean2) Condition clean buret w/ several mL of titrant 2-3 times3) Fill buret w/ titrant (not necessarily to 0.00 mark) and drain some titrant out to get rid of bubbles trapped in the valve (don't leave funnel hanging on top)4) Take initial buret reading to 2 decimal places5) Add titrant while analyte solution is stirring at moderate rate6) When end point is near (when transient color of indicator stays for a longer period of time), rinse the wall of the flask that holds the analyte solution with d-H2O from a wash bottle and add titrant dropwise7) When end-point color stays for more than 30 seconds, take the final buret reading

Then try StudyFetch, the AI-powered platform that can answer your questions and teach you more about it!